Red Series - Dimmer Switch
Troubleshooting | Device Unresponsive - Red Series Dimmer Switch
TLDR: These instructions are broken into 2 different symptoms -- here are the abbreviated solutions: Symptom #1: Physical control of the switch = No, Remote control of the switch = Yes Tap the Config Button 8x (LED bar should turn Green) Symptom #2: ...
Troubleshooting: Dimmer Switch Turns Off Right After Being Turned On
Summary (TLDR) While the absolute cause is unknown as to this happens on certain bulbs, the way to fix it is to set a maximum brightness level from within your app (or the switch itself). Try setting Parameter 6 to around 80-85%. For Hub specific ...
Troubleshooting: Buzzing (Humming) From the Switch or Light
Summary (TLDR) If there is buzzing coming from the light switch, then ensure the load attached to the switch is under the maximum wattage. If it is, then unfortunately you have a defective switch -- please reach out to us for an RMA. However, if your ...
Troubleshooting: Dimmer Switch LED Bar is Blinking Red
Summary (TLDR) When the LED Bar is blinking red, it means the load attached to the light is too small in a non-neutral setting. In other words, if you are not using a neutral wire, you need to have your load (light) be at least 25W (NOTE: Not a 25W ...
Troubleshooting: Flickering or Strobing Lights on Gen 2 Dimmers
Summary (TLDR) Flickering lights typically stem from a mismatch in LED/Switch drivers or using a dimmer with non-dimmable bulbs. Inovelli dimmers use MOSFET and Leading Edge technology which work with many different bulbs, however, if you have a bulb ...