Hubitat
How To: Update your Dimmer Switch Firmware | Hubitat
Please proceed at your own risk. Bricked switches due to user error will not be replaced nor refunded. If you'd like to mail in your switch to have us do it for you, we're happy to do so. Updating the firmware is a fairly safe & fool proof procedure ...
How To: Update your Fan/Light Switch Firmware | Hubitat
Please proceed at your own risk. Bricked switches due to user error will not be replaced nor refunded. If you'd like to mail in your switch to have us do it for you, we're happy to do so. Updating the firmware is a fairly safe & fool proof procedure ...
How To: Change the LED Bar Color | Hubitat
Overview In this article we will go through how to change the LED bar color on your Inovelli Switches. This will work for the On/Off and Dimmer Switches, Red Series and Black Series. It's a great option to either match the room you're in or if your ...
How To: Set an Auto-Timer on Your Switch (Turn Off Bulbs) | Hubitat
Overview In this article we will go through how to set an Auto Off Time on a Inovelli Switch. This will work for all switches but we are going to use an Inovelli Black Series On/Off switch in this example. I'm notorious for leaving lights on and ...
How To: Trigger a RGBW Bulb or Strip for Severe Weather | Hubitat
Please note that this is not meant to be a substitute for alerting you for severe weather warnings. As IFTTT is cloud based, there may be a delay in your bulb alerting you. As always, if you suspect severe weather, please check your phone and if ...
How To: Automatically Turn a Smart Bulb On/Off with a Sensor | Hubitat
Overview There are times where its more convenient to have a Smart Bulb turn on from motion as opposed to having to tap a switch. Like when you're hands are full leaving a pantry.
How To: Automatically Turn a Smart Switch On/Off with a 4 in 1 Sensor | Hubitat
Overview There are times where its more convenient to have a Smart Switch turn on from an action as opposed to having to tap a switch. Fortunately, this is an easy fix with a 4 in 1 Sensor and a Smart Switch. In this example setup, we will be using ...
How To: Transition Hubs by Excluding and Including | Hubitat
Summary (TLDR) When you're changing hubs (ie: Wink/ST to Hubitat) you'll need to make sure your products are successfully reset (or excluded) from the previous hub. If you're having issues pairing your device to Hubitat, you may need to exclude ...
How To: Setting up Notifications in Rule Machine | Hubitat
Introduction This guide will show you how to use Rule Machine in Hubitat to activate the notification feature of our Red Series products (Dimmer, Switch, Fan + Light, etc.). There are a few different ways of doing this, but using the built in Rule ...
How To: Hubitat Firmware Upgrade Tool
Introduction Updating your firmware for Inovelli Devices has never been easier when using Hubitat. In this article, we will talk you through how to use this tool. Please proceed at your own risk. Bricked switches due to user error will not be ...
How To: Use the Z-Wave Association Tool | Hubitat
Overview Note: With Z-Wave, the security level for devices that are going to speak with each other via associations need to match. If you have a C-7 hub this means you need to include all of the participating devices at the highest security level ...
How To: Set up Scenes with Rule Machine | Hubitat
Note: If you don’t see the option to “Prefill all button actions for”, first go into the Inovelli device page and hit “Save Preferences” with our driver installed. This will send the “numberOfButtons” event that is needed for that option to be ...