Pixel Effects | RGBTW Smart LED Strip & Controller Kit | LZW45
Pixel Effect List
There are currently 45+ built-in effects. We plan on adding more as time goes on and if you have a suggestion, please do not hesitate to reach out. Below are the effects currently supported by the LZW45. You'll need to reference this list while selecting your animation within your hub.
|Effect #||Effect Name||Firmware Ver.|
|5||Color Wipe Reverse Inverse||1.20|
|6||Color Wipe Random||1.20|
|19||Twinkle Fade Random||1.20|
|30||Chase Flash Random||1.20|
|31||Chase Rainbow White||1.20|
|33||Chase Blackout Rainbow||1.20|
|34||Color Sweep Random||1.20|
|36||Running Red Blue||1.20|
Spec Sheet | RGBTW Smart LED Strip & Controller Kit | LZW45
The LZW45 Inovelli RGBTW Smart LED Strip is the first Z-Wave enabled individually addressable lightstrip that works with many different hubs and gateways and allows remote control from anywhere in the world. Overview Make: Inovelli Model #: LZW45 ...
How To: Setup Effects with the Red Series Smart LED Strip | SmartThings
Intro The process is very similar to setting up a notification on our switch, dimmer, and fan + light using the installed device handler. For example, you can have the strips flash red and blue like police lights when your alarm is triggered. The ...
How To: Setup Effects with the Red Series Smart LED Strip | Hubitat
Intro The process is very similar to setting up a notification on our switch, dimmer, and fan + light using the installed device driver. For example, you can have the strips flash red and blue like police lights when your alarm is triggered. The ...
Installation & Setup | LZW45 | Red Series Smart LED Strip & Controller | Hubitat
You will need to install a Device Driver prior to pairing with Hubitat. Instructions can be found here: LZW45 Device Driver Instructions To setup effects/animations on your lightstrip, please see the following link: LZW45 Effect/Animations Setup - ...
Device Parameters | RGBTW Smart LED Strip & Controller Kit | LZW45
Advanced Parameter Information 21 Quick Strip Effect 4 0- 2147483647 See Table 21.1 Below (1) Sending Basic, Binary Switch, Multilevel, and Color SET will automatically disable the strip effect . (2) Toggling OFF -> ON will cancel effect mode set on ...